This seed dryer or ventilation unit can be used to dry or ventilate small amounts of (basic)seed. The seed dryer consist of a drawers in which trays containing seed can be placed. A ventilator sucks heated or stipulated air and divides it among the trays. By this way the small amounts of seed get dried perfectly.

This seed dryer or ventilation unit can be used for drying or ventilating small amounts of (basic) seed. The seed dryer consist of a standing cabinet in which drying trays with seed can be placed. A ventilator sucks heated and conditioned air and spread this over the trays. When the tray with seed is placed, a sliding door at the entrance gap is automatically opened. By this entrance gap air is separated around the tray and blown through the seed. By this way the seed is dried in small amounts optimally.

With the cabinetdryer you can dry small to average amounts of seed (film coated, pelleted etc.) fast and controlled. A processor provides an optimal drying process. While the heated or dried air takes care of the transport of moisture. The seed can be dried statically or in a fluïd bed.

With the rotationdryers the wet seed is caught in special canisters. The canisters containing the seed are placed in the cabinetdryer.

The cabinetdryer is fitted with a tray with rollers. 3x 2 canisters with seed can be placed on these rollers. A ventilator sucks air from above and creates pressure below. Underneath every canister there is a small gap. Because of the pressure from below, air gets sucked through the gap and through the canisters with seed.

With the continuous box dryer every box with seed is dried individually. Using this method the boxes with seed can be placed in and removed from the dryer independently. The drying can therefore start the moment the box is filled with seed. The desired drying can be programmed for each individual box. The drying will stop at the moment the seed reaches the desired moisture content.

Drying boxes are a practical drying method for seed. The boxes with seed are placed in front of an air-distribution system. The boxes are made in a way, so that every box containing seed is dried individually; Air goes trough the seed separated by layers and every box has its own exit. The layer thickness is never more then the box. The space is used optimal, there the seed boxes are piled up. The installations can be delivered as mobile units and eventually placed outside.

Solid installations can be placed in almost every existing (and new) room.